Pool leak detection in Jensen Beach, FL from Blue Science: pressure and dye testing that finds where a Jensen Beach swimming pool is losing water, a written report with the location and the results explained, the leak repair quoted separately, and a 60-day warranty when we do the repair. Pricing varies by pool, so call for a quote on the standard leak detection visit.
Jensen Beach, FL Pool Leak Detection
Stop guessing where the water is going
We follow the evidence with pressure testing, dye testing, and focused inspection, then explain what we found and the practical next step.
Pool Leak Detection for Jensen Beach
Water loss has a source; find it before it becomes a bigger problem
Jensen Beach pools on Hutchinson Island sit on sand a few feet above a water table that moves with the lagoon, so a leaking line never leaves a puddle, while the pools on the Indian River Drive bluff have plumbing that has been replaced in pieces for decades and settles toward the water a little more every year. If the autofill runs more than the sea breeze explains, Blue Science finds the source and quotes the repair separately.
On the island the tide tells us which side of the water table the line is on and the corroded light niche gets tested first; on the bluff we map what is actually under the deck and dye-test the skimmer joint on the river side, where the settling pulls hardest.
How a Jensen Beach pool shows a leak
A level that moves with the tide on Hutchinson Island, a coping joint that opened on the river side of a bluff pool, air in the pump basket, a light that quit after the level fell, or a water bill that climbed in the dry season are the signs worth a call. Sand drains the loss away, so a wet spot in the yard is rarely part of the picture.
Corroded light niches and return fittings on the island, skimmer throats on settled river-side decks, and main drain lines on the older downtown pools are the usual sources, and each is dye-tested during the visit.
Leak detection for Jensen Beach and Indian River Drive
Our leak technicians cover Hutchinson Island, Indian River Drive, and downtown Jensen Beach on the same schedule as our weekly routes, so a visit can be arranged within days. Call for pricing on the standard leak detection visit in Jensen Beach, FL, with repairs quoted separately once the source is found.
Detection carries a 60-day warranty when Blue Science performs the repair, and the repaired line is pressure tested again afterward.
A leak test in Jensen Beach
From a bucket on the step to a marked spot
-
Bucket test read Yesterday's bucket tells us how much of the loss is evaporation and how much is not. -
Pressure and dye Each line is isolated and pressure-tested; dye finds cracks around fittings and lights. -
The mark The source is marked, photographed, and written up with the repair options.
Your Palm Beach County & Treasure Coast team
21 cities, one phone number, the same faces
The leak technician, the repair crew, and the weekly routes work out of the same Palm Beach County & Treasure Coast office, so a found leak becomes a scheduled repair without a second company.

Homeowners in Jensen Beach love the scientific approach we bring to pool leak detection. Check out our reviews here.
Turn Water Loss into a Clear Answer
Time to find out where your Jensen Beach pool is losing water?
Tell us how quickly the water level is dropping and what you have noticed around the pool or equipment. We will help you schedule the appropriate leak detection visit and get the issue fixed.
Good to know
Questions Jensen Beach Pool Owners Ask
Can the high water table hide a leak?
It can change the reading. Groundwater pushing in from outside can slow a shell leak while the pump is off and let it run when the pump is on. That is why I test with the pump running and again with it off before I go looking for the spot.
Answered by a Blue Science leak technician, Palm Beach County & Treasure CoastWhy is my pool losing 1 inch of water a day?
Three things drop a pool an inch a day, and only one of them is normal. Evaporation on the hottest Jensen Beach days can take up to half an inch, Atlantic salt air, daily storms, and warm water all year permitting; splash-out and backwashing take a little more on a busy weekend; everything past that is a leak. Pressure-side leaks show up as a wet spot or a pump that spits air, suction-side leaks as air in the pump basket, and shell leaks as a level that stops dropping at the same spot every time, which our leak detection visit sorts out with pressure tests and dye in any of the 21 cities we cover. Detection is warranted for 60 days in Jensen Beach when Blue Science makes the recommended repair, in all 21 cities we serve.
How can I find out where my pool is leaking from?
Start at the equipment pad, because a dripping pump seal, a weeping filter tank, or a loose union is a repair rather than a leak, and Atlantic salt air, daily storms, and warm water all year produce plenty of those. If the pad is dry, run the bucket test for 24 hours with the autofill off, then watch where the level stops: at the skimmer mouth points to the skimmer or a return line, below the light points to the niche or the main drain line, and a level that keeps falling points to the shell; in Jensen Beach our leak detection visit confirms it with pressure testing on the lines and dye at every fitting, as in all 21 cities we serve. Detection and repair are quoted separately in Jensen Beach, so you approve a defined fix; 561-760-9500 schedules both.
What is the easiest way to find a leak in a pool?
Rule out evaporation first, with a bucket. Mark the pool level and a bucket filled to match, wait a day with the autofill off, and compare; in Jensen Beach, Atlantic salt air, daily storms, and warm water all year can push evaporation up, but the bucket shows exactly how much. Anything the pool loses beyond that is a leak, and the detection visit locates it with pressure on each line and dye at each fitting; 561-760-9500 books it. The bucket test is also how our Jensen Beach technicians check the repair afterward, against Atlantic salt air, daily storms, and warm water all year.
What is the most common cause of pool leaks in Jensen Beach?
Plumbing and fittings, not the shell. Skimmer throats pull loose where the deck and the pool move differently, return lines crack where a deck has settled, and light niches and conduit corrode in wet ground; in Jensen Beach, Atlantic salt air, daily storms, and warm water all year speed up all three. Shell cracks are rarer and easier to see; the plumbing leaks hide under the deck, which is why the search starts under pressure rather than with a flashlight, in all 21 cities we serve. Once fixed, a Jensen Beach pool on weekly service gets its water level checked every visit, whatever Atlantic salt air, daily storms, and warm water all year bring.
Where is the most common place for a pool leak to occur?
The skimmer, where the throat meets the shell, is the most common single spot, followed by the return fittings, the light niche and its conduit, and the main drain line, all of them worked on by Atlantic salt air, daily storms, and warm water all year. A Jensen Beach pool with an attached spa adds the spillway and the spa fittings to the list; each one shows a different pattern in the water level, and the dye test settles it in minutes once the level has narrowed the search, as it does across 21 cities.
Seen our truck on your street?
That is because we also service Palm City, Port Saint Lucie, Hobe Sound, Jupiter Island, and Tequesta
The route that covers Jensen Beach runs through these towns on the same days, with the same technicians. If you split time between houses, or your parents' pool is a few exits away, one phone number covers all of them.




