Pool leak detection in Melbourne, FL from Blue Science: pressure and dye testing that finds where a Melbourne swimming pool is losing water, even when daily storms, pollen, and water warm enough for algae most of the year make evaporation hard to judge, a written report with the location and the results explained, the leak repair quoted separately, and a 60-day warranty when we do the repair. Pricing varies by pool, so call for a quote on the standard leak detection visit.
Melbourne, FL Pool Leak Detection
Stop guessing where the water is going
Pressure testing, dye testing, and focused inspection follow the evidence on a Melbourne pool, and then we explain what we found and the practical next step.
Pool Leak Detection for Melbourne
Water loss has a source; find it before it becomes a bigger problem
Melbourne pools sit on sandy fill that settles a little every wet season, so decks in Suntree tilt toward the fairway, lagoon lots in Eau Gallie shift toward the water, and return lines crack where the ground moved. If the pool drops faster than the bucket test allows, Blue Science finds the source with pressure and dye testing and quotes the repair separately; pricing varies, so call for a quote.
Melbourne sand drains a leak straight down, and a screened enclosure hides the water that would otherwise show on the deck, so the search here relies on the pressure gauge and the dye rather than any wet spot.
Leak clues in a Melbourne pool
From the leak crew
A pool that drops more than a quarter inch a day, a pump that spits air at startup, a deck that has settled toward the fairway or the lagoon, or a water bill that climbed through the summer all point to a leak. Most Melbourne leaks trace to returns cracked under settling decks in Suntree, skimmers loosened on shifting lagoon lots in Eau Gallie, and light niches corroded by salt air near Wickham Park.
Call for pricing on the standard leak detection visit in Melbourne, FL, with repairs quoted separately once the source is found. Detection is warranted for 60 days when Blue Science makes the recommended repair.
Leak detection for Melbourne and the lagoon
From the leak crew
Eau Gallie, Suntree, and Lansing Ridge are already on our weekly route, which is why a leak visit in Melbourne is usually days away. The technician isolates and pressure-tests each line, dyes the fittings, lights, and skimmer, and checks the shell wherever the readings point.
The findings come with photos and a written repair quote the same day.
A leak test in Melbourne
From a bucket on the step to a marked spot
-
Bucket test read Yesterday's bucket tells us how much of the loss is evaporation and how much is not. -
Pressure and dye Each line is isolated and pressure-tested; dye finds cracks around fittings and lights. -
The mark The source is marked, photographed, and written up with the repair options.
How we find a leak
Your Greater Orlando team
32 cities, one phone number, the same faces
The leak technician, the repair crew, and the weekly routes work out of the same Greater Orlando office, so a found leak becomes a scheduled repair without a second company.
Against daily storms, pollen, and water warm enough for algae most of the year, our scientific approach to pool leak detection is what Melbourne customers love about us. Read our reviews here.
Turn Water Loss into a Clear Answer
Want to know what is happening in your Melbourne pool?
Tell us how fast the water level is dropping and what you have noticed around the pool or the equipment; we will schedule the right leak detection visit in Melbourne and get the issue fixed.
Call Our Pool Experts
321-275-1900 Get a QuoteGood to know
Questions Melbourne Pool Owners Ask
Can the high water table hide a leak?
It can change the reading. Groundwater pushing in from outside can slow a shell leak while the pump is off and let it run when the pump is on. That is why I test with the pump running and again with it off before I go looking for the spot.
Answered by a Blue Science leak technician, Greater OrlandoWhy is my pool losing 1 inch of water a day?
Because an inch a day is more than evaporation. Evaporation in Melbourne runs up to about half an inch a day in the hottest, driest stretches and less most of the year, even with daily storms, pollen, and water warm enough for algae most of the year, so a pool that drops an inch every day is losing water somewhere: a skimmer throat, a return line, a light niche, a crack, or a fitting under the deck. The bucket test tells them apart in 24 hours, and it is the first thing our team at 321-275-1900 asks whether you have done. Detection is warranted for 60 days in Melbourne when Blue Science makes the recommended repair, in all 32 cities we serve.
How can I find out where my pool is leaking from?
Watch the level, then test the lines. Mark the waterline, turn off the autofill, and note where the pool settles over a day or two, the skimmer mouth, the return fittings, the light niche, and the main drain each showing a different stopping point, whatever daily storms, pollen, and water warm enough for algae most of the year are doing. What you cannot see from the deck, a Melbourne leak detection visit finds by pressure-testing each line and dye-testing the fittings and the shell, the same routine across 32 cities. Our Melbourne technicians document the source with photos before any repair is proposed, whatever daily storms, pollen, and water warm enough for algae most of the year did to the pipes.
What is the easiest way to find a leak in a pool?
The bucket test. A bucket on the top step, filled to the pool's level and marked, loses water only to evaporation, daily storms, pollen, and water warm enough for algae most of the year included; the pool loses water to evaporation and to any leak. Compare the two lines after 24 hours with the autofill off and the gap is the leak; in Melbourne that takes a day and no tools, and finding the source takes the pressure and dye testing of a detection visit, one call to 321-275-1900. Our Melbourne visit repeats the bucket test with the pump off and on, which separates plumbing leaks from shell leaks, in all 32 cities.
What is the most common cause of pool leaks in Melbourne?
The skimmer, first and by a wide margin. The throat where the skimmer meets the shell moves every time the deck and the pool move differently, and in Melbourne, daily storms, pollen, and water warm enough for algae most of the year keep them moving. Return fittings and light niches come next, then underground lines where a deck has settled, and shell cracks last; each shows a different pattern in the water level, and the dye test confirms it in minutes, as it has across 32 cities. In Melbourne a leak found at a fitting is usually a small repair; one under the deck is scoped in writing before any cutting, in all 32 cities.
Does a leaking pool get worse if I wait?
Yes, in three ways, and daily storms, pollen, and water warm enough for algae most of the year speed all three. Every day the autofill covers the loss you pay for water and for the chemicals that leave with it; water leaving under the deck washes out the fill and settles the deck, which opens more joints; and a pool that drops below the skimmer lets the pump suck air and run dry, which turns a leak call into a repair call. In Melbourne the leak that started in spring is a bigger job by fall, which is why 321-275-1900 is worth a call early.
Seen our truck on your street?
That is because we also service West Melbourne, Palm Bay, Merritt Island, Cocoa Beach, and Rockledge
Our Melbourne routes do not stop at the city limit. The same pool leak detection runs in each of these towns, and the schedule is built so a technician working Melbourne is a short drive from any of them.
