Pool leak detection in Panama City, FL from Blue Science: pressure and dye testing that finds where a Panama City swimming pool is losing water, even when Gulf salt, sugar-sand, and rental turnover make evaporation hard to judge, a written report with the location and the results explained, the leak repair quoted separately, and a 60-day warranty when we do the repair. Pricing varies by pool, so call for a quote on the standard leak detection visit.
Panama City, FL Pool Leak Detection
Stop guessing where the water is going
We follow the evidence, pressure testing, dye testing, and focused inspection, then explain what we found on your Panama City pool and the practical next step.
Pool Leak Detection for Panama City
Find the source of the water loss before it becomes a bigger Panama City problem
Panama City pools lose water into sand that never shows a puddle: a return line shifted when Hurricane Michael moved the deck, a skimmer throat pulled loose by surge in St. Andrews, a light niche corroded by bay air in the Cove. If the pool drops more than the bucket test allows, Blue Science finds the source with pressure and dye testing and quotes the repair separately; pricing varies, so call for a quote.
Sand is the Panama City complication: a leak that would show as a wet lawn anywhere else drains straight down here, so the search runs line by line under pressure instead of waiting for the ground to confess.
Leak clues in a Panama City pool
A pool that loses more than a quarter inch a day in the Cove, a pump that spits air at startup in St. Andrews, a deck that has settled since the storm in Bunkers Cove, or an autofill that never shuts off all point to a leak. Most Panama City leaks trace to plumbing moved by the 2018 rebuild, skimmers loosened by surge, and light niches corroded by salt air.
Call for pricing on the standard leak detection visit in Panama City, FL, with repairs quoted separately once the source is found. Detection is warranted for 60 days when Blue Science makes the recommended repair.
Leak detection for Panama City and the bay side
Our leak technicians cover the Cove, St. Andrews, and Bunkers Cove on the same schedule as our weekly routes, so a visit can be arranged within days. Suction and return lines are pressure-tested first, then fittings, lights, and the skimmer are dye-tested, and the shell is inspected where the evidence leads.
Rental pools get priority before a turnover weekend, because a pool that cannot hold water cannot hold a booking.
A leak test in Panama City
From a bucket on the step to a marked spot
-
Bucket test read Yesterday's bucket tells us how much of the loss is evaporation and how much is not. -
Pressure and dye Each line is isolated and pressure-tested; dye finds cracks around fittings and lights. -
The mark The source is marked, photographed, and written up with the repair options.
Your Emerald Coast team
6 cities, one phone number, the same faces
The leak technician, the repair crew, and the weekly routes work out of the same Emerald Coast office, so a found leak becomes a scheduled repair without a second company.

Our Panama City customers love our scientific approach to pool leak detection. Check out our reviews here.
Turn Water Loss into a Clear Answer
Want to know what is happening in your Panama City pool?
Let us know how quickly the level drops and what you have seen around the pool or equipment, and we will schedule the appropriate leak detection visit and get the issue fixed, whatever Gulf salt, sugar-sand, and rental turnover have done to the plumbing.
Good to know
Questions Panama City Pool Owners Ask
Can the high water table hide a leak?
It can change the reading. Groundwater pushing in from outside can slow a shell leak while the pump is off and let it run when the pump is on. That is why I test with the pump running and again with it off before I go looking for the spot.
Answered by a Blue Science leak technician, Emerald CoastWhy is my pool losing 1 inch of water a day?
An inch a day usually means a leak, not the weather, even with Gulf salt, sugar-sand, and rental turnover. Evaporation takes a quarter inch or so on a hot Panama City day and far less in humid or cool weather; wind, a heater, a spa spillway, and Gulf salt, sugar-sand, and rental turnover push it up, but not to an inch. Run the bucket test, a bucket on the step filled to the pool level, 24 hours with the autofill off, and compare: water lost beyond what the bucket lost is leaking, most often at the skimmer, a return line, or a light niche, the pattern in all 6 cities we serve. Our Panama City leak detection visit starts at the equipment pad and works toward the shell, with Gulf salt, sugar-sand, and rental turnover in mind, and repairs are quoted separately once the source is found.
How can I find out where my pool is leaking from?
Watch the level, then test the lines. Mark the waterline, turn off the autofill, and note where the pool settles over a day or two, the skimmer mouth, the return fittings, the light niche, and the main drain each showing a different stopping point, whatever Gulf salt, sugar-sand, and rental turnover are doing. What you cannot see from the deck, a Panama City leak detection visit finds by pressure-testing each line and dye-testing the fittings and the shell, the same routine across 6 cities. The 60-day detection warranty applies in Panama City when Blue Science makes the repair, across all 6 cities we serve.
What is the easiest way to find a leak in a pool?
The bucket test. A bucket on the top step, filled to the pool's level and marked, loses water only to evaporation, Gulf salt, sugar-sand, and rental turnover included; the pool loses water to evaporation and to any leak. Compare the two lines after 24 hours with the autofill off and the gap is the leak; in Panama City that takes a day and no tools, and finding the source takes the pressure and dye testing of a detection visit, one call to 850-549-9400. Our Panama City visit repeats the bucket test with the pump off and on, which separates plumbing leaks from shell leaks, in all 6 cities.
What is the most common cause of pool leaks in Panama City?
Plumbing and fittings, not the shell. Skimmer throats pull loose where the deck and the pool move differently, return lines crack where a deck has settled, and light niches and conduit corrode in wet ground; in Panama City, Gulf salt, sugar-sand, and rental turnover speed up all three. Shell cracks are rarer and easier to see; the plumbing leaks hide under the deck, which is why the search starts under pressure rather than with a flashlight, in all 6 cities we serve. In Panama City a leak found at a fitting is usually a small repair; one under the deck is scoped in writing before any cutting, in all 6 cities.
Can a pool leak be in the plumbing under the deck?
Often it is, and Gulf salt, sugar-sand, and rental turnover make it likelier. Suction lines from the skimmer and main drain and the return lines to the jets all run under the deck, and they are the lines a shifting Panama City deck stresses most as Gulf salt, sugar-sand, and rental turnover work on it; pressure testing isolates each line and shows which one will not hold, and locating equipment narrows the break to a spot before anything is opened. Detection and repair are quoted separately, so you approve a defined fix rather than a search, the same way in all 6 cities.
Seen our truck on your street?
That is because we also service Panama City Beach, Santa Rosa Beach, Miramar Beach, Destin, and Pensacola
Same standards, same people, same phone number, wherever in the Emerald Coast the pool happens to be. The team that handles pool leak detection in Panama City is the team in each of these towns.




