Pool leak detection in West Melbourne, FL from Blue Science: pressure and dye testing that finds where a West Melbourne swimming pool is losing water, a written report with the location and the results explained, the leak repair quoted separately, and a 60-day warranty when we do the repair. Pricing varies by pool, so call for a quote on the standard leak detection visit.
West Melbourne, FL Pool Leak Detection
Stop guessing where the water is going
We follow the evidence, pressure testing, dye testing, and focused inspection, then explain what we found on your West Melbourne pool and the practical next step.
Pool Leak Detection for West Melbourne
Water loss has a source; find it before it becomes a bigger problem
West Melbourne pools were built on fill that keeps settling for years after the sod goes down, so a return line that was fine at closing can crack under a deck that has dropped an inch in Sawgrass Lakes or Brookshire. If the pool drops faster than the bucket test allows, Blue Science finds the source with pressure and dye testing and quotes the repair separately; pricing varies, so call for a quote.
A young West Melbourne pool that loses water is usually a plumbing joint the builder buried in fill that moved, so the search runs each line under pressure and finds the joint rather than guessing at the shell.
Leak clues in a West Melbourne pool
A pool that drops more than a quarter inch a day, a pump that spits air at startup, a deck that has dropped away from the coping, or an autofill that never rests all point to a leak. Most West Melbourne leaks trace to returns cracked under settling decks in Sawgrass Lakes and Brookshire, unsupported plumbing joints near Space Coast Field of Dreams, and skimmers pulled loose as new fill compacted.
Call for pricing on the standard leak detection visit in West Melbourne, FL, with repairs quoted separately once the source is found. Detection is warranted for 60 days when Blue Science makes the recommended repair.
Leak detection for West Melbourne subdivisions
Sawgrass Lakes, Heritage Oaks, and Brookshire are on our weekly route, so a leak technician can usually be there within days. Every line is pressure-tested on its own, the fittings, lights, and skimmer get dye, and the shell is checked wherever the readings point.
The findings come with photos and a written repair quote the same day, including what a builder's warranty may still cover.
A leak test in West Melbourne
From a bucket on the step to a marked spot
-
Bucket test read Yesterday's bucket tells us how much of the loss is evaporation and how much is not. -
Pressure and dye Each line is isolated and pressure-tested; dye finds cracks around fittings and lights. -
The mark The source is marked, photographed, and written up with the repair options.
Your Greater Orlando team
32 cities, one phone number, the same faces
The leak technician, the repair crew, and the weekly routes work out of the same Greater Orlando office, so a found leak becomes a scheduled repair without a second company.

Our West Melbourne customers love our scientific approach to pool leak detection. Check out our reviews here.
Turn Water Loss into a Clear Answer
Want to know what is happening in your West Melbourne pool?
Tell us how quickly the water level is dropping and what you have noticed around the pool or equipment. We will help you schedule the appropriate leak detection visit and get the issue fixed.
Good to know
Questions West Melbourne Pool Owners Ask
Can the high water table hide a leak?
It can change the reading. Groundwater pushing in from outside can slow a shell leak while the pump is off and let it run when the pump is on. That is why I test with the pump running and again with it off before I go looking for the spot.
Answered by a Blue Science leak technician, Greater OrlandoWhy is my pool losing 1 inch of water a day?
It is almost certainly a leak. Evaporation in West Melbourne peaks around half an inch a day in a dry, windy heat wave and drops to almost nothing in humid weather, so an inch a day, every day, means water is leaving through the plumbing or the shell, whatever daily storms, pollen, and water warm enough for algae most of the year are doing. The clue is where the level stops: at the skimmer, the skimmer or a return is the suspect; below the lights, look at the light niche or the main drain line; all the way down, the shell has a crack, and 321-275-1900 gets the test scheduled. Call 321-275-1900 before the autofill hides it: in West Melbourne a leak that runs all summer costs more in water and chemicals than the visit that finds it.
How can I find out where my pool is leaking from?
You narrow it, we confirm it. The bucket test proves it is a leak; the stopping point of the water level narrows it to the skimmer, a return, the light, or the shell; and the pressure test on each line, with dye at the fittings, pins it down, daily storms, pollen, and water warm enough for algae most of the year or not. On a West Melbourne pool that is usually a plumbing joint under the deck rather than a crack, and the visit ends with a written report of the source, the same report we write in all 32 cities. In West Melbourne the visit starts at the equipment pad and works toward the shell, with daily storms, pollen, and water warm enough for algae most of the year in mind.
What is the easiest way to find a leak in a pool?
Rule out evaporation first, with a bucket. Mark the pool level and a bucket filled to match, wait a day with the autofill off, and compare; in West Melbourne, daily storms, pollen, and water warm enough for algae most of the year can push evaporation up, but the bucket shows exactly how much. Anything the pool loses beyond that is a leak, and the detection visit locates it with pressure on each line and dye at each fitting; 321-275-1900 books it. Turn the autofill off first in West Melbourne, or the test measures nothing, whatever daily storms, pollen, and water warm enough for algae most of the year do.
What is the most common cause of pool leaks in West Melbourne?
Movement. The deck and the shell move at different rates as daily storms, pollen, and water warm enough for algae most of the year work on a West Melbourne yard, and every joint between them, the skimmer throat, the return fittings, the light niche, the spa spillway, is where a leak starts. Structural cracks are rare by comparison and easier to see, which is why the visit tests the joints first, in every one of the 32 cities we serve. Once fixed, a West Melbourne pool on weekly service gets its water level checked every visit, whatever daily storms, pollen, and water warm enough for algae most of the year bring.
Can a pool leak be in the plumbing under the deck?
Often it is, and daily storms, pollen, and water warm enough for algae most of the year make it likelier. Suction lines from the skimmer and main drain and the return lines to the jets all run under the deck, and they are the lines a shifting West Melbourne deck stresses most as daily storms, pollen, and water warm enough for algae most of the year work on it; pressure testing isolates each line and shows which one will not hold, and locating equipment narrows the break to a spot before anything is opened. Detection and repair are quoted separately, so you approve a defined fix rather than a search, the same way in all 32 cities.
Seen our truck on your street?
That is because we also service Melbourne, Palm Bay, Merritt Island, Cocoa Beach, and Rockledge
Ask around West Melbourne and someone will know us. Ask in the next town over and the answer is the same, because those pools sit on the same Greater Orlando routes as yours.




