Pool cleaning service in Park Cities, TX from Blue Science: weekly pool maintenance from $149 a month with the same technician every week, the pool water tested and balanced on every visit, and a photo report before the truck leaves. Pool cleaning in Park Cities runs on a regular weekly route with no contract, which is how homeowners keep a backyard swimming pool sparkling through hard water, spring pollen, and July heat without thinking about it.
Park Cities Pricing, No Contracts
Pool cleaning plans and prices for Park Cities
Choose the level of weekly help that fits your Park Cities pool and household routine.
Full Service Plan
Starting at$209/month*
- Weekly pool service
- 23-point maintenance plan
- Netting and vacuuming included
- Routine maintenance chemicals included
- Equipment and water-balance checks
- Required filter cleaning every 3–4 months: $179
- Algae-free and water-balance guarantee included
*Monthly price is based on a four-week month. Filter-cleaning requirements depend on filter type.
Partial Service Plan
Starting at$149/month*
- Weekly pool service
- 20-point maintenance plan
- Homeowner handles netting and vacuuming
- Routine maintenance chemicals included
- Equipment and water-balance checks
- Required filter cleaning every 3–4 months: $179
- Algae-free and water-balance guarantee included
*Monthly price is based on a four-week month. Filter-cleaning requirements depend on filter type.
Prices shown are for Park Cities, TX. Final quote depends on pool size, spa, and landscaping.
The Park Cities pools sit behind houses on Mockingbird, Caruth, and the streets along Turtle Creek, under live oaks and pecans that have been growing since the 1920s, and they are expected to look finished on any afternoon a neighbor drops by. Blue Science keeps them clear and balanced with a weekly visit from a technician who already works University Park and Highland Park every week.
Deep canopy means a Park Cities pool gets less sun than it looks, so chlorine holds longer but leaves and pollen never stop, and worn plaster on an older pool stains fast if debris sits. The weekly routine here is netting, brushing, and steady calcium before anything else.
A Tuesday on the Park Cities route
What a visit looks like from our side
-
Truck loaded Test kit calibrated, chemicals for the day's pools, nets and brushes on the rack. -
Your pool Baskets, brush, vacuum if needed, then the water test and the dose written on the report. -
Report sent Photos and readings land in your inbox before the truck leaves your street.
Ready for clear water without the weekend work?
Add Your Pool to Our Route
Accountability you can see
Every Truck Is GPS-Tracked
A technician cannot open your job ticket unless GPS confirms the truck is at your home. When your Park Cities report says we came, we came.
One of the seven Blue Science promises. See all seven.
Your DFW Metroplex team
41 cities, one phone number, the same faces
The technician who cleans your pool is the one who spots the failing seal, and the repair truck that follows is from the same office.

Our Park Cities customers love our scientific approach to weekly pool service. Check out our reviews here.
More pool services in Park Cities
Blue Science also provides pool leak detection in Park Cities and pool repair in Park Cities from the same DFW Metroplex team, and every DFW Metroplex city with pool cleaning is listed on the Pool Cleaning directory for the DFW Metroplex.
Office hours Mon-Fri 7am - 6pm · Saturday 9am - 2pm. Call 972-953-6261 or start online.
Clear communication after every visit
Your Pool is in Good Hands
Your assigned Park Cities service technician will leave a pool maintenance report each time service is performed on your pool.
Begin Weekly Service
Tap or click to open the full-size report
Good to know
Questions Park Cities Pool Owners Ask
Do you really come every week, even in winter?
Yes. A North Texas pool does not stop needing attention in January; leaves keep falling, and a freeze week is when I most want eyes on the pump and the water level. The visit is shorter in winter, but the water test, the baskets, and the equipment check happen every time.
Answered by a Blue Science service technician, DFW MetroplexHow often should a pool guy come out?
Once a week for a residential pool, and in Park Cities that is chemistry rather than a sales pitch: chlorine used up by hard water, spring pollen, and July heat leaves the water open to algae within days, bacteria follow, and chloramines build up until the pool smells sharp and stings your eyes. A weekly stop resets all of that, keeps swimmers comfortable, and keeps the pump, filter, and heater working instead of grinding through dirty water, on every one of the 41 cities we serve. That is why every plan we offer across the 41 cities of the region is weekly: the pool does not take a week off, so the service cannot either.
What is the best pool service in Park Cities?
A good pool service in Park Cities is measurable: the water stays clear through hard water, spring pollen, and July heat, the baskets and filter pressure are checked before the pump suffers, and the report after each visit shows the readings. The same technician comes back on the same day each week, which is the standard Blue Science holds its routes to in all 41 cities it covers here. That is what the Park Cities route is built to deliver, one pool at a time, and 972-953-6261 is where it starts.
What are the three C's of pool maintenance?
Circulation, cleaning, and chemistry, and a Park Cities pool needs all three every week under hard water, spring pollen, and July heat. Circulation means enough pump run time to filter the water daily, cleaning means the skimmer, the baskets, and the walls kept clear, and chemistry means free chlorine and pH held in range; skip one and the other two cannot cover for it, which the photo report from any of the 41 cities we serve will show. Weekly service in Park Cities exists to keep the three in step against hard water, spring pollen, and July heat, not to rescue one after it slips.
What should I do between visits?
Keep the pump running its normal schedule, keep the water at the middle of the skimmer, and net anything large that lands after a storm, because hard water, spring pollen, and July heat do the rest. On Partial Service the netting and vacuuming between visits is yours; on Full Service it is ours, and if the Park Cities weather does something unusual, a quick call to 972-953-6261 is welcome.
Why is it so hard to keep a pool clean in Park Cities?
A Park Cities pool deals with hard municipal water that leaves calcium scale at the tile line, live oak and pecan pollen every spring, hail and wind debris from spring storms, freeze weeks in January and February, and 100-degree stretches that burn through chlorine in days. Each of those pushes the water in a different direction, and the pool only stays clear when someone corrects for all of them every week, which is the job weekly service does in all 41 of the cities we serve.
What is the best weekly maintenance to keep a pool clean in Texas?
Test and balance the water, brush the tile line, empty both baskets, and watch the filter pressure, every week. That rhythm beats hard water, spring pollen, and July heat in Park Cities.
How long should it take a pool guy to clean a pool?
Twenty to forty-five minutes for a weekly visit, longer after a storm. In Park Cities the technician tests and balances the water, brushes, nets, empties the baskets, and sends the photo report.
Seen our truck on your street?
That is because we also service University Park, Highland Park, Preston Hollow, Richardson, and Addison
Our Park Cities routes do not stop at the city limit. The same weekly pool cleaning runs in each of these towns, and the schedule is built so a technician working Park Cities is a short drive from any of them.





